Marcas




   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

   Arquivos ‘Revolution Design’

Revolution Design Ultra Glowplug Wrench

Quarta-feira, Março 5, 2014 @ 11:03 PM
Publicado por admin

1781299_419601598183998_1290080862_o

The Ultra Glowplug Wrench is the latest nitro tool release from Revolution Design Racing Products. The tool is designed for the use with standard and turbo glowplugs, the main body is made from high quality spring steel and incorporates an 8mm nut driver for the plug while an O-ring equipped recession at the top end of the tool takes a spare glow plug, making the wrench the ideal companion for demanding qualifiers and finals. Laser-etched logos let the tool stand out while a sturdy cross pin makes tightening and undoing even tightly fitted plugs a breeze.

‪#‎RDRP0101‬ RDRP Ultra Glowplug Wrench

Ultra Body Reamer

Quarta-feira, Março 5, 2014 @ 11:03 PM
Publicado por admin

1979189_419603858183772_744163296_o
Revolution Design Racing Products introduce the Ultra Body Reamer. Making use of the proven RDRP tool handle for effortless usage the reamer is equipped with a high-quality and very sharp spring steel reamer tip that sports a stepped design allowing to drill holes from 3mm up to 11mm in diameter. A vented safety cap protects the tip as well as your hands and other tools in your pit bag. The black anodised 7075-T6 aluminium handle sports the proud Revolution Design Racing Products logo and perfectly matches with the other high-quality RDRP tools.

‪#‎RDRP0099‬ Revolution Design Racing Products Ultra Body Reame

Revolution Design Ultra Flywheel Puller

Quarta-feira, Março 5, 2014 @ 11:03 PM
Publicado por admin

1898916_419602428183915_1053889643_o

The Revolution Design Racing Products Ultra Flywheel Puller makes maintaining nitro clutches easy. The tools is designed for most 1/8th clutches and helps to separate the flywheel from the crankshaft without any damage. By clamping the black anodised aluminium fork behind the flywheel and turning down the shaft the flywheel is pulled away from the crankshaft without harming the flywheel, the crankshaft or the tool itself. The tool is also equipped with a 10mm nut driver that is ideal to tighten the clutch nut after fitting the flywheel. Both the black anodised 7075-T6 aluminium fork and the high quality spring steel shaft sport the RDRP logos for a factory look and easy identification.

# RDRP0103 Revolution Design Ultra Flywheel Puller